I completed the windshield and canopy installation today. The windshield was installed with stainless steel fasteners. I had a problem with one of the nuts which ended up cross threaded and then I stripped the screw. I ended up drilling out the screw while holding the nut in order to remove it.
Stripped Screw 
Windshield Attachment 
Windshield Attachment
While installing the windshield I found it didn’t seem to sit down tight on the top of the bow. I’m not sure why but I used a washer to space if off. With the windshield installed I was able to reattach the canopy by inserting the hinge pin.
Dave's Sonex Builders Log 
You must be logged in to post a comment.