I finished the last few rivets for the turtle deck and moved on to the tail cone assembly. Next, I installed the four fasteners through the fuselage sides for the upper side splice plates. I installed the lower splice plates temporarily. When I install aft bottom sheet later I will need to install the correct fasteners. After completing all of the work on the tailcone I moved on to the lower forward skin. I found my last piece of 0.032 and cut out a piece 41 inches long by 48 inches wide to use as the starting point for the layout.
Welcome to my builders log for Sonex S/N 767. It won't be as big as a real 767 but if you scale the speed I bet it will be almost as fast
Dave's Sonex Builders Log 