I completed the rudder pedal pivot block assemblies and worked n the fairlead mount blocks. I completed all of the holes in the fairlead blocks except for the 1/4 inch countersinks. The phenolic I started with measures just over 3/4 inch thick so I may need to sand the fairleads down to get 3/4 inches if the fairleads do not fit. This might effect the 1/4 inch counter bores depending on which side I sand. I’ll order the fairleads from Aircraft Spruce before I finish the mounting blocks.
Welcome to my builders log for Sonex S/N 767. It won't be as big as a real 767 but if you scale the speed I bet it will be almost as fast
Dave's Sonex Builders Log 