Today I started work on the right wing tip. I grabed the template I had made for the left wing and fit it to the right wing tip. It fit well, which is a good sign that both wings are the same. Next I marked the location for the angle to go at the bottom rear of the wing tip. (This is actually the top rear right now since the wing is up side down.) Next I marked out the angle with two 5/8" flanges on a piece of aluminum. I cut out the angle and started the bending process using the forming blocks I made when creating the left wing tip.
Dave's Sonex Builders Log 
You must be logged in to post a comment.