Today I continued on working on the rear edge of the left wing. I retrieved the flaps and proceeded to fit the hinge for the flaps. I discovered one of my hinges was too short but I had one that worked. I fit the hinge and pilot drilled to #40 then up drilled to #30. A this point I think I have the wing ready to debur and then rivet. I still need to countersink the holes for the tip ribs/skin and finish the up drilling.
Welcome to my builders log for Sonex S/N 767. It won't be as big as a real 767 but if you scale the speed I bet it will be almost as fast
Dave's Sonex Builders Log 