I started making the main spar channels for the horizontal stabilizer. I located my last piece of Z03-02 channel then calculated the cut length and cut the channel. Again, I used a hack saw to start the cut on the web of the channel and then finished the cuts in the flanges with snips. I used my bench sander to clean up the ends. Next I trimed the end using right and left hand snips and filed the 1/8" radius. I finished the session by putting the 90 degree bend in the end of the channel.
Welcome to my builders log for Sonex S/N 767. It won't be as big as a real 767 but if you scale the speed I bet it will be almost as fast
Dave's Sonex Builders Log 